Looking for the best plasma cutters under 500? You’ve come to the right place! In this article, Best Smart Tool will introduce you to the top five plasma cutters on the market, all of which come in at under 500 dollars.
1. Lotos Technology LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
The Lotos Technology LTP5000D 50Amp NonTouch Pilot Arc Plasma Cutter is a great tool for cutting through rough surfaces. The pilot arc technology allows you to cut without touching the tip to the metal, which results in a better cutting quality and longer consumable life. The newly designed upgraded torch and consumables also ensure more precise cutting and durability of consumable life. Additionally, the plasma cutter is compact and has a handle for portability. It also uses nonhazardous compressed air to cut safe and at low cost.
- ★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- ★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- ★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.
- ★ 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- ★ 𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: We offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞, 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 𝐚𝐧𝐝 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲, please submit warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 customer service(via phone/email) is available to assist you.
- ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
- ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
- ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33"; ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
- ★ SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
- ★ PORTABLE and POWERFUL--The LTP5500D can easily cut 3/5” (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects. ★ Non-HF--Non-HF Blowback Start, there is no HF interference.
- ★ SETUP WITHIN 1 MIN--the per-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.
- ★INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. ★OUTPUT: 20-55 A DC output, 3/5” ideal clean cut and 1” maximum severance cut under 220/240V. 20-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V. ★SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- ★ PACKAGE INCLUDES-- power supply, blowback Non-HF start cutting torch, consumables, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator.
- ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
2. PrimeWeld 50A Air Inverter Plasma Cutter, Portable Plasma Cutting Machine, Premium and Rugged Plasma Cutter Kit, Automatic Dual Voltage 110V/220V AC with Plasma Torch, 1/2″ Clean Cut, CUT50D
When precision metalwork cuts matter, the PrimeWeld 50A Air Inverter Plasma Cutter Portable Plasma Cutting Machine is the perfect tool for the job. With a max severance thickness of 12, this machine can cut through a variety of materials quickly and easily. The PrimeWeld 50A Air Inverter Plasma Cutter is truly portable, making it easy to move between projects, and it is backed by our fanatical customer service. So, if you are serious about getting the job done, the PrimeWeld 50A Air Inverter Plasma Cutter is the perfect tool for you.
- THE ULTIMATE PLASMA CUTTER - When precision metalwork cuts matter. As one of our customers said, “It will do the job very well I have had mine for almost three years and it's been very reliable.” Our 50 Amp Digital Air Inverter Plasma Cutter handles cuts up to 1/2" (Max Severance Thickness: 3/4") with ease. Designed for both demanding industrial and construction work, or home and hobby use.
- MAKES THE PRECISION CUTS YOU NEED - With your Prime Weld Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat. Have limited outlets? No problem. The diversity between 110v and 220v has you covered.
- TRULY PORTABLE - If you need a portable Plasma Cutter that makes moving from project to project a breeze at a price that won’t break the bank, this is it. As another happy Amazon customer said, “For the price this plasma cutter is amazing…” Add our Plasma Cutter to your cart today and experience our high-quality product craftsmanship for yourself.
- DESIGNED BY PROFESSIONALS - If you are serious about getting the job done, PRIMEWELD is a brand you can trust backed by our fanatical customer service. Our high-quality Plasma Cutters are perfect for metalwork jobs of all shapes and sizes, and our optimized design is based on state-of-the-art MOSFET transistors.
3. Plasma Cutter, Max Cutting Thickness 20MM, 50A Inverter DC Inverter 110/220V Dual Voltage Cutting Machine with Free Accessories Easy Cutter Welder,Making Our Planet More Productive
The plasma cutter is a machine that uses a plasma torch to cut through metal. There are a few different types of plasma cutters, but the most common is the inverter plasma cutter.
The plasma cutter has a few advantages over other types of metal cutting machines. It is very portable, and can easily be moved around the shop. It also uses nonhazardous compressed air to cut the metal, which makes it safe to use. The plasma cutter produces minimal slag, and has a longer consumable life than other types of metal cutting machines.
The plasma cutter also has a few disadvantages. It can only cut metal up to a certain thickness, and it can be difficult to cut through rough, painted, or rusty surfaces. It also requires an air compressor to start, which can be a bit of a hassle.
- 🔔★Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper,And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life.
- 🔔★50 Amp 85%-100% Digital Inverter Air Plasma Cutter,Smart Wide Voltage 90~260V, 50/60Hz(With Converter Power Cord) 20-50A AC- DC Output, 1/2” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 20-50A DC Output, 1/3" Ideal Clean Cut And 2/5" Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-hazardous Compressed Air To Cut, Safe And At Low Cost.
- 🔔★Package Includes:1 x Plasma Cutter (Fixed 220V Power Plug) 1 x 4M S7 Universally Cutting Torch 1 x High-Quality Air Regulator 1 x 240V To 120V Power Plug Adaptor Conversion Cord 1 x Earth Clamp 20PCSx Plasma Cutting Consumables Common 1 x Manual（Air Compressor Start Required）
- 🔔★Automatic Dual Voltage / Dual Frequency (110/230 V 50/60Hz).Long Term Supply Of Consumables On S7 Shop.
- 🔔★ HOLA,Buy With Confidence: We Offer 3-years Warranty, Please Submit Registration Form on Our Website.
4. 50Amp Non-Touch Pilot Air Plasma Cutter 110V / 220V Dual Voltage Inverter DC Digital Display IGBT Portable Cutting Machine
A plasma cutter is a device that uses an inert gas, such as argon, to create a plasma jet. The plasma is created by passing a high voltage arc through the gas, which ionizes it. The high temperature and velocity of the plasma jet cuts through metal.
There are two types of plasma cutters: non-touch pilot arc and touch pilot arc. Non-touch pilot arc plasma cutters use a small electrode to start the arc. Touch pilot arc plasma cutters use the tip of the electrode to start the arc.
Touch pilot arc plasma cutters are more efficient than non-touch pilot arc plasma cutters because they don’t require a small electrode. Touch pilot arc plasma cutters also produce less slag than non-touch pilot arc plasma cutters.
Non-touch pilot arc plasma cutters are less expensive than touch pilot arc plasma cutters. Non-touch pilot arc plasma cutters are also smaller and lighter than touch pilot arc plasma cutters.
Touch pilot arc plasma cutters have a higher output than non-touch pilot arc plasma cutters. Touch pilot arc plasma cutters can also cut through more difficult materials than non-touch pilot arc plasma cutters.
Touch pilot arc plasma cutters are more dangerous than non-touch pilot arc plasma cutters. Touch pilot arc plasma cutters can cause electrical shocks and burns.
- Non-Touch Pilot Arc Plasma Cutter: pilot arc technology allows you to cut without touching the tip to the metal.efficiently cuts though rough, painted, and rusty surfaces,and produces minimal slag, better cutting quality and longer consumable life
- IGBT Inverter Cutting Ability: 10-50A dc output,1/2” ideal clean cut and 3/5'' maximum severance cut on 220V. 10-35A dc output,1/3" ideal clean cut and 2/5" maximum severance cut on 110V. work with the non-hazardous compressed air to cut stainless steel,alloy steel,mild steel,copper,cast iron and chrome,air pressure 60-70psi recommended
- Safe Design：built-in over-heat,over-voltage protection,it is under-voltage protection.It is not only can be suitable for businesses and diy users but also fully accommodating the demands of professional operators
- Package Includes:power supply, plasma cutting torch, ground clamp,converter power cord, pre-installed NPT 1/4” industry type d plug and air filter regulator, consumables, instruction manual, etc.(as picture)( stainless steel,gas tube, hoop,plasma tips nozzle extended, electrode- extended,shroud ceramic cup ,gas ring)
5. TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2″ Clean Cut
TOOLIOM 50A NonTouch Pilot ARC Air Plasma Cutter Dual Voltage 110V220V IGBT Inverter Metal Cutting Machine 12 Clean Cut is a great tool that has many benefits. It can effectively cut rough painted and rusty surfaces and generates the least slag. The torch head does not need to touch the metal plate then it will start arc. Better cutting quality and longer consumable life are two of the main benefits of this machine. It is also powerful, with an output of up to 50A. The machine is certified by ETL and has over current protection and over load protection. It is also portable, with an autovoltage that adapts to 110 V and 220 V input power.
- Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life.
- Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut.
- Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
- Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.
- Portable: Auto-voltage adapts to 110 V - 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need.
6. YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Power Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved
The YESWELDER CUT55DS 55Amp NonTouch Pilot Arc Air Power Plasma Cutter is a great tool for cutting through rough painted and rusty surfaces. It produces minimal slag and has a pilot arc technology that allows you to cut without touching the tip to the metal. This plasma cutter also has a built-in post flow that keeps the consumable cool for longer life. It has a powerful cutting ability of 1055 A DC output and can cut through stainless steel, alloy steel, mild steel, copper, and aluminum. It is lightweight and portable, making it easy to move from location to location, and it is ETL certified for safety.
- [NON-TOUCH PILOT ARC] Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- [BUILT-IN POST FLOW] When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
- [POWERFUL CUTTING ABILITY] 10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V，60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- [LIGHTWEIGHT AND PORTABLE] Allows for connection to 110 or 220 volt receptacles without tools, Portable in the shop or at the job site—at 13 l b, the shoulder strap allows the end user to easily move from location to location.
- [ADDED SAFETY] Certificated by ETL, Automatic compensation for voltage fluctuation, over current protection, over load protection, temperature control.
7. PrimeWeld Pilot Arc 50A Plasma Cutter, 200A TIG/Stick Welder Combo, Multipurpose Welding Machine for Home or Jobsite Use with 1/2-inch Clean Cut, Plasma Cutter, TIG Welder and Stick Welder, CT520DP
The PrimeWeld Pilot Arc 50A Plasma Cutter 200A TIGStick Welder Combo Multipurpose Welding Machine is a versatile tool that can be used for a variety of welding and cutting tasks. At only 32 pounds, it is highly portable and can be used for home or jobsite applications. It has a 60 duty cycle at max amps for all functions and features IGBT inverter technology for a lighter, smaller transformer. The machine can cut all types of metals up to 12 foot thick and includes softswitching technology and a fullbridge design for a longer life and stable arcs at low temperatures. It is backed by a 3-year warranty.
- 3-IN-1 PLASMA CUTTER/WELDER COMBO: Combines plasma cutting, TIG/stick welding and Pilot Arc welding functions in one convenient and versatile unit. Includes 50A plasma cutter, 200A TIG welder and 200A stick welder (plus aluminum stick welding).
- TIG WELDER PLASMA CUTTER COMBO: Multipurpose welding machine can cut all types of metals up to 1/2-foot thick with the 50-Amp plasma cutting function. Features 110/220VAC (50Hz/60Hz) Pilot arc cutting and 1/2" clean cut or 1/4" TIG and stick welding.
- PORTABLE ARC PLASMA CUTTER: At only 32 lbs., it's ideal for home or jobsite use. Has a 60% duty cycle at max amps for all functions, AC 110/220±15%; Input power frequency: 50/60Hz. Plus, IGBT inverter technology makes the transformer lighter/smaller.
- VERSATILE WELDING, CUTTING MACHINE: Cuts many metals including stainless steel, aluminum, titanium, cobalt, nickel alloys and cast iron. Includes soft-switching technology and full-bridge design for a longer life and stable arcs at low temperatures.
- GREAT CUSTOMER SERVICE: Backed by a 3-year warranty, we're committed to after-sales service. When you contact us, you speak with real technical specialists and representatives, and our USA-based parts and customer service is available 7 days a week.
8. Plasma Cutter,Pilot Arc BTC500DP 50Amps Dual Voltage 110/220V Plasma Cutting Machine (BTC500DP 110/220)
The Plasma Cutter Pilot Arc BTC500DP 50Amps Dual Voltage 110220V Plasma Cutting Machine BTC500DP 110220Pilot Arc Function is a great option for those looking for a plasma cutter that can cut through thicker materials. This machine has a pilot arc function which allows it to start the arc without making contact with the material being cut. This can be a great feature for those who are looking to extend the life of their consumables. Additionally, the machine has dual voltage capabilities, so it can be used with either 110 or 220 volt power supplies. The machine also has an air pressure gauge and regulator, so the user can easily adjust the air pressure to the correct level. Additionally, the machine has a post time function which allows the user to extend the cooling time of the torch head. This can be helpful in prolonging the life of the consumables. The machine also has a current display, so the user can easily select the correct current for the material being cut. The machine has a maximum cutting thickness of 12mm.
- [Pilot Arc Function]: This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
- [Dual-Voltage 110/220V]: Automatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.
- [Air Pressure & Air Compressor]: The regulator and gauge are installed in front of the panel，you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.
- [Post Time Function]: BTC500DP with post time function, the adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head. In generally, we recommend a cooling time of 4-8 seconds, if the Plasma cutter worked too long please cool it for 10-12 seconds.
- [Cutting Thickness]: BTC500DP is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.
FAQs
A plasma cutter is a device that cuts through electrically conductive materials by means of a plasma arc. The plasma cutter works by creating a high-temperature plasma arc between an electrode and the workpiece. The plasma arc is created by an electric arc that is passed through a gas that is ionized.
There are a number of different factors that you need to consider when choosing a plasma cutter. One of the most important factors is the power of the plasma cutter. You also need to consider the thickness of the materials that you will be cutting.
Another important factor to consider is the type of plasma cutter. There are a number of different types of plasma cutters on the market, including air plasma cutters, water plasma cutters, and CNC plasma cutters.
The following are five of the most frequently asked questions about plasma cutters.
1. What is the difference between an air plasma cutter and a water plasma cutter?
The main difference between an air plasma cutter and a water plasma cutter is the type of gas that is used to create the plasma arc. An air plasma cutter uses air as the gas, while a water plasma cutter uses water as the gas.
2. What is the difference between a CNC plasma cutter and a non-CNC plasma cutter?
The main difference between a CNC plasma cutter and a non-CNC plasma cutter is the level of automation. A CNC plasma cutter is fully automated, while a non-CNC plasma cutter is not automated.
3. What is the difference between a low-end plasma cutter and a high-end plasma cutter?
The main difference between a low-end plasma cutter and a high-end plasma cutter is the quality of the cut. A high-end plasma cutter will produce a cleaner and more precise cut than a low-end plasma cutter.
4. What is the difference between a portable plasma cutter and a stationary plasma cutter?
The main difference between a portable plasma cutter and a stationary plasma cutter is the portability. A portable plasma cutter is lightweight and easy to transport, while a stationary plasma cutter is not portable.
5. What is the difference between a DIY plasma cutter and a professional plasma cutter?
The main difference between a DIY plasma cutter and a professional plasma cutter is the quality of the cut. A professional plasma cutter will produce a cleaner and more precise cut than a DIY plasma cutter.
